1- Overviews
NetTAP®A full visual control of Data Acquisition device(8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports).
NetTAP® A full Data Scheduling Management device(duplex Rx/Tx processing).
NetTAP® A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps).
NetTAP® Supported collection & reception of link data from different network element locations.
NetTAP® Supported collection & reception of link data from different switch routing nodes.
NetTAP® Supported raw packet collected, identified, analyzed, statistically summarized and marked.
NetTAP® Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging.
NetTAP® Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
NetTAP® Supported real-time packet capture analysis, data source identification.
2- Specifications
NT-iMXTAP-24G-E NetTAP® NPB Functional Parameters
|
Network Interface
|
GE Electrical Ports
|
16*10/100/1000MBASE-T
|
SFP Slots
|
8*GE SFP ports, support GE Optical/Electrical Module
|
Deployment mode
|
Inline mode
|
support max 8*10/100/1000MBASE-T inline mode
|
SPAN monitoring input
|
support max 23*SPAN inputs
|
Monitoring Output
|
support max 23*monitoring outputs
|
Functions
|
Total QTYs interface
|
24
|
Line speed process capability
|
24Gbps
|
Traffic replication / aggregation / distribution
|
support
|
In-line mode and SPAN monitoring
|
support
|
Up/Down Traffic Aggregation
|
support
|
Up/Down Traffic Monitoring
|
support
|
Distribution based on traffic identification
|
support
|
Distribution based on IP / protocol / port Five tuple traffic identification
|
support
|
Optical interface single fiber transmission
|
support
|
Support Ethernet encapsulation independence
|
support
|
BYPASS Function(Inline mode)
|
support
|
BYPASS switch time(Inline mode)
|
< 50ms
|
Network Side Delay
|
< 100ns
|
LinkReflect(Inline mode)
|
support
|
No Flash Break when Power ON/OFF
|
support
|
CONSOLE Network Management
|
support
|
IP/WEB Network Management
|
support
|
SNMP V1/V2C Network Management
|
support
|
TELNET/SSH Network Management
|
support
|
SYSLOG Protocol
|
support
|
User authentication function
|
Password authentication based on user name
|
Electric(1+1 Redundant Power System-RPS)
|
Rated supply voltage
|
AC110-240V/DC-48V (Optional)
|
Rated power frequency
|
50HZ
|
Rated input current
|
AC-3A / DC-10A
|
Rated power function
|
100W
|
Environment
|
Operating Temperature
|
0-50℃
|
Storage Temperature
|
-20-70℃
|
Operating Humidity
|
10%-95%, Non-condensing
|
User Configuration
|
Console Configuration
|
RS232 interface,9600,8,N,1
|
Password authentication
|
support
|
Rack Height
|
Rack space (U)
|
1U 485mm*44.5mm*350mm
|
3- Order Information
NT-iMAXTAP-24G-E 8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 24Gbps