1- Overviews
NetTAP® A full visual control of Data Acquisition device(0*10GE SFP+ plus 24*GE SFP ports).
NetTAP® A full Data Scheduling Management device(duplex Rx/Tx processing).
NetTAP® A full pre-processing and re-distribution device(bidirectional bandwidth 64Gbps).
NetTAP® Supported collection & reception of link data from different network element locations.
NetTAP® Supported collection & reception of link data from different switch routing nodes.
NetTAP® Supported raw packet collected, identified, analyzed, statistically summarized and marked.
NetTAP® Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging.
NetTAP® Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
2- Specifications
|
NT-FTAP-24G-D NetTAP® NPB Functional Parameters
|
|
Network Interface
|
GE ports
|
24*GE SFP slots
|
|
|
10GE ports
|
0*10GE SFP+ slots
|
|
Deployment mode
|
SPAN monitoring input
|
support
|
|
|
In-line mode
|
support
|
|
|
Total QTYs interface
|
24
|
|
|
Traffic replication / aggregation / distribution
|
support
|
|
|
Link QTYs supporting Mirror replication / aggregation
|
1 -> N link traffic replication (N <24)
N-> 1 link traffic aggregation (N <24)
G Group(M-> N Link) traffic replication and aggregation [G * (M + N) <24]
|
|
Functions
|
Distribution based on traffic identification
|
support
|
|
|
Distribution based on IP / protocol / port Five tuple traffic identification
|
support
|
|
|
Distribution strategy based on protocol header the key labeled traffic identifies
|
support
|
|
|
Strategic distribution based on deep message content identification
|
support
|
|
|
Support Ethernet encapsulation independence
|
support
|
|
|
CONSOLE Network Management
|
support
|
|
|
IP/WEB Network Management
|
support
|
|
|
SNMP V1/V2C Network Management
|
support
|
|
|
TELNET/SSH Network Management
|
support
|
|
|
SYSLOG Protocol
|
support
|
|
|
User authentication function
|
Password authentication based on user name
|
|
Electric(1+1 Redundant Power System-RPS)
|
Rated supply voltage
|
AC110-240V/DC-48V [Optional]
|
|
|
Rated power frequency
|
AC-50HZ
|
|
|
Rated input current
|
AC-3A / DC-10A
|
|
|
Rated power function
|
150W(24G: 100W )
|
|
Environment
|
Operating Temperature
|
0－50℃
|
|
|
Storage Temperature
|
-20-70℃
|
|
|
Operating Humidity
|
10%-95%, Non-condensing
|
|
User Configuration
|
Console Configuration
|
RS232 Interface, 9600,8,N,1
|
|
|
Password authentication
|
support
|
|
Rack Height
|
Rack space (U)
|
1U 460mm*45mm*440mm
|
3- Order Information
NT-FTAP-24G-D 24*GE SFP ports
